Search results

I found q6050 knocked off and R6051 both fans now spin correctly

Yes it works fine even if you restart it....but when u shutdown the system it wont power on with battery untill u do the procedure again

system detects battery only if charger is first plugged before putting battery flex

no changes after changing u5000

13.08V charger only 12.62V charger+battery 12.27V battery only Only one fan spins very fast..

Q7065 voltages PPVBAT_G3H_CONN=12.60V PPVBAT_G3H_CHGR_R=12.73V TBA_BGATE=4.3V No changes after replacing..

Machine doesn't turn in with charger+battery and battery only... Only boots with charger

The board came in dead with burnt cd3217.. After replacing the both cd3217 machine now draws 20V 0.07A trackpad not clicking,and doesn't recognized in DFU PPBUS_G3H = 12.23V PP3v3_G3H = 3.30V PP1V8_SLPS2R = 1.8V PP1V8_AWAKE = 1.8V PP1V1_SLPS2R = 1.1V PP0V8_SLPS2R = 0.79V PP3V3_AWAKE = 3.29V...

Diode mode to ground SMBUS_SMC_5_G3_SCL=0.440/3.4V SMBUS_SMC_5_G3_SDA=0.4403.4V

Yes Machine boot's without battery.

But system not detecting battery.. I have tried testing with another battery the system doesn't display on screen and draws 20v and trackpad stops bouncing.

I didn't not detect any temperature changes after i inject 3.5v.... Now board draws 20v and boots i dont know what have done or what happened🫤

Should i return or leave R6915 and inject voltage to 3V3_G3H power rail?

"PPVIN_G3H_P3V3G3H is 5V R6910 R6911 R6912 R6913 all have correct values C6915 is 3.4V after i remove R6915 No PPBUS_G3H still PP3V3_G3H is 3V I have replaced R and D6902

I have changed U6903...no changes R6910/13 have correct values.. PP3V3_UPC_XB_LDO is 3.3v on all cd3215 PP3V3_G3H is still 2.2V PPBUS_G3H=0V PPDCIN_G3H=5.1V

C7023=1.9 ohm C7020=3.0 ohm

C7020=0.430 C7023=0.550

PP3V3_UPC_XB_LDO is 2.2v on all cd3215 PP3V3_G3H is 2.2V

Have changed U7000 no changes R7021 Has a hole in it. Have replaced it too no changes.. SMC_RESET_L is 0v.. PPVIN_G3H_P3V3G3H is 3.9v high voltage ⚡️