Search results

Any ideas?

Ok I believe I have the right setting. i am using a fluke 15b+. I rotated the selection to the ohm symbol and pressed the yellow button twice. I now have a diode symbol in the top right .presumably this is what you meant. SCL reads 0.504v sca reads 0.502v

Right .were closing now. I'm pretty sure that was diode mode but maybe I had it set wtong

My mistake other way around. SCL is 46.5 SDA us 11.23 EDIT: the readings seem to keep flipping. keeping red on earth all the time..

SCL is giving 11.23kohm pin4 SDA is giving 46.5 kohm pin5 This is with red on left usb for ground black on pins.

PPBUS_G3H with battery reads 8.55v PPBUS_G3H without battery reads 8.56v Resistance Between pin 17/18 is 3.2 and pin 27/28 is reading 20.5

To start off, This board and the schematics i aquired seem to be different. Some bits on the schematic appear to be missing compared to all of the 820-00165 boards i have. I am measuring dcin and only getting 18v instead of 25v The backlight connector does not get above 8v. Not sure where to...