Search results

Thing is I did not try a new trackpad because customer did not care about that as they use a mouse normally. I did not know that this would affect the time and date.

yes I mean I am unable to click. 0V on pin 3 Q5701 coconut says battery status is good, customer came in with no battery, he was using it like that. I offered him this used one for cheap and he said he'd take it.load cycles 138 age 1620 days I also think Duke correct in saying that the trackpad...

I have a water damaged one here that works fine except for selecting an item by trackpad and the fact that after some time the clock goes incorrect and then internet stops working until the clock is corrected. any advice for this one?

I replaced R0910 and noticed R9704 smoking, so I changed R9716, C9704, R9704,R9714 and R9731 and I am still seeing smoke from R904. this happen only when plugged in, with battery only it does not bubble and smoke now I am nervous to put more power to take measurement of F9700

3.22 Ohm between 17/18 U7000 20.49 Ohm between 27/28 U7000

0V Pin 2 R9715 0.14V both pin 1 and 2 R9704

any update on the iPhone section? I get it if the decision has been made to not make a section for that. kind regards

So I should reball the smc?

sorry I meant to type 3.41V my apologies

pin 5 U5010 =3.41V liquid signs around U4800 and U9701 Y5010 I think oscillates ever so slightly pin 1 1.5723V-1.5724V pin 2 1.5742V-1.5724V SMC_BC_ACOK is OL then says 3.1V-2.9 and goes back to OL again and back. SMC_RESET_L on R7000 3.41V SMC_ONOFF_L on R5014=4.41V

3.41V on pin 5 of U5010

I guess this means sys_one_wire is not working is this correct? I am also only getting 8.18V on C7563 PPBUS_G3H, this is low right?

I did yes. It also for me is very hard. I get pretty busy most days and it being just me to do everything even sweeping thr floor is reaelly hard. Hope I find someone soon at least for the front counter.

thanks so much!

Was wondering if there could be an iPhone section since I would bet lots of us here do iPhone repairs. thanks!

Thanks for the input Louis and Duke.

I almost think despite all the crap we deal with as Louis and Duke mention that we also are fighting against the desire for people to repair, especially when they get burned at a shop with little or no values. Not to mention all the ill communication that goes on with our biz.

So I hired a new guy who has a full time job as some type of engineer. He is new to Canada and said that back is his country he did fix a couple iPhones and a few odds, nothing serious, he was sure to let me know he wasn't a superstar or anything. He did great his first day with regular repairs...

So here is the story, guy comes in to fix samsung s6 lcd. I do the fix and notice the screen he was using had some corrosion on it. I ask him upon pickup when he got the phone wet. He says he never did, we know this to not always be the truth. Then he says he recently bought it as new and I knew...

4.7 kilohm on pin 5 of Q9807 in diode mode 1.35 milliohm on pin 2 of Q9807 in diode mode 0.44V on pin 5 of Q8907 in resistance mode 0.43V on pin 2 of Q9807 in resistance mode