Search results

hello i have 820-02899 with problem 5V and have spikes 0.160A 1 sec and stop on slot 1 have logo pd fix on aixun tester power and second no but same 5V 0.112A for test i have replace UF400 and UF500 same i have flash 2sec with thermal camera on UC840 PP3V8AON/PH1/PH2/PH3 have 3.8V PPBUS_AON...

hello please i have help for machine a1989 i have 19V / 0A left and write usb-c in 1st port on 2nd port have 5V 0.27A for test i want reflash soc rom but don't have file you can send link ? or other way?

hello, client have change battery, machine works during 2 month and now no power i have check no water damage PPBUS_G3H have only 3.5V I have remove F7040/41 and same, 3.5V on pin 1 and 1.12V on pin 2 Replace U7000 for check and same PP3V42_G3H is present i have green light on charger

Hello, I have a problem with a MacBook Pro A2779 820-02841-A when it starts up the apple logo is displayed and as soon as the session starts the screen goes black. I've tried a reinstallation, a DFU, unplugged keyboard, trackpad, battery, angle sensor, but nothing changes, no trace of oxidation...

hello i have mainboard 820-00850 with 1x CD3215C00Z defect after test with sofix machine i have replace but actually it's 5V and i have 0.020A and 1x pulse to 0.370A and restart 0.020A PPBUS_G3H : 12.3V PP3V3_G3H : 3.3V in diode mode, L9080/81 are low : 0.08V, i have pulse 1sec 0.45 but after...

hello i have 820-02016 mainboard battery is not detect, think info battery have problem no short on pin 1/2/3/4/5 on J5150 when i put new battery compatible or original not charging and 0% but when i remove usb-c cable machine stay lit if i remember i need make jump between 2 pins

hello please i have problem for restore in dfu in this machine need for test before replace nand, the file for U1970 if you can get i don't have found on badcaps forum

Hello, after oxydation of the trackpad and the keyboard control board, we replaced these two parts. Everything works except that the F1/F2/F3 keys, etc., don't correspond to the actions offered (volume control, brightness, etc.). We replaced the keyboard, the same thing, and did a DFU restore...

hello i have replace screen for this model. After machine start in recovery and i have message need updating but impossible normally it's touch bar, i have replace with 3 touchbar and new original flex cable and same i have test fpc connector and see line DFR_TOUCH_INT_L to gnd on schematic i...

i have machine start but stuck on apple logo - Drive and ssd remove - Programming new bios cleanME Each start stuck on logo apple and no command work, only reset pram

hello i have buy 2x mainboard new (never open) model 820-02188-A When i start i have toothed wheel and after blue screen i have put in duf and start recovery after i have apple logo but an error when i restore it i have error message and never work have original box 639-11151 and mainboard...

hello i have mainboard 820-02841 without wireless logo we have test restore os same we have restore in dfu same sometimes i have logo but when we click no responding no short on line PP3V8_AON_WLBT / PP1V8_S2

hello please do you have the firmware for programmed efi chip thanks

hello, i have mainboard 820-01987 with no image no start i have check and no liquid damage, machine enter in DFU mode correctly. I have restore and same I have 20V and 0.6A without battery With thermal cam, see U8500 very hot. I have remove and check pins. On pin 1 and 3 i have short. I inject...

i have mainboard with 5v with thermal camera i have D6902 very hot no short on each pin i have replace it and U6903 but same

i have backlight dead and composant burn no schematic and no see on mainboard the number

hello i have mainboard 820-020210 with this problem Wifi not detect in system but in recovery working and no work randomly but i have see too in information don't see the serial number you have idea?

hello, Motherboard stuck to 5V and 0.020A i have push to 0.09A maximum PPVBUS USBC1 5v PPBUS_AON 12.14V PP3V8AON_PH1/PH2/PH3 all 3.747V ON L5230, the voltage varies between 0.6V and 1.4V but never stable

hello i have on each usb c port 5V / 0.06A PPBUS_G3H = 12V PP20V_USBC_XB_VBUS= 0V

I have mainboard stay on 5V and 0.020A no liquid damage, machine works normally and 1 day nothing PP3V3_AON = 3.3V PP3V8_AON = 3.8V PP5V_S2 = 0v F5200 = 12.2v