Search results

diode mode side pch 2/3 without L3507 0,600V, replace L3507 with another same problem

Board work very well, but no camera, and automatic brightness on screen/keyboard, manual control work good, connector and cable looks fine pins of J3502 6: 5V 5: 3,3V 4: 3,3V 3: 0V diode mode : 0,540V cable connected 2: 0V diode mode : 0,540V cable connected 1: GND L3507 checked camera...

noticed CHGR_AGATE_DIV 6,8V it's normal ?

Board was little liquide damage U5400 area and U3890 area PPBUS_G3H, PP3V42_G3H, PPVRTC_G3H fine. other area very clean First I have pin 6, 5 of U6100 pulse, tried flash with good rom know 2936-B board (I've backup original rom), voltage after flash was good, after tried with original bios...

solved with ultrasonic cleaner probably crap under pch

Board was liquid damage smc area and spi area, begin no ppbus i replace smc now i have 12.60V, PP3V42_G3H fine after PPVRTC_G3H pulse, replace U2600 and cleaning area now 3V stable now fan spin 1 sec and stop loop already check spi terminaison, R7402/03 fine ALL_SYS_PWGD 0V when fan no...

thanks, i will try ;)

please show me where put solder wires i will try

No Title

https://www.youtube.com/watch?v=twHCu36--I8 probably fake, solder wires around mux area + extraction gpu

ok thanks, board go to donor

Sincerely nothing heat :/ it's my first board nothing heat, with 15W yet I should find easily :/

Begining problem ppbus_g3h 10ohms, so injected current and find Q7550 bad, replace and now board start up no chime (just beep when remove memory) already tried memory on another board 820-2915 and work no display on internal and external monitor cpu heating, vcore present problem possible...

No Title solved broken line C2233, I placed a wire that passes through the pcb

voltage on C1802/03 0,4V PPVRTC_G3H 3.3V

current draw 2.88A pin 1 with 5V pin 2 0.01A resistance to gnd pin 1 0 ohm pin 2 15kohms

nothing heat

Board was liquid damage find U9410 burned, i've replaced U9410 liquide damage U3890 area ((replace chip and capacitors coroded) green light, orange light present u7000 17/18 and 27/28 checked smc_bc_acok 3.35v smc_onoff_l 3.48v smc_adapter_en 3.48v smc_reset_l 3.50v ppbus_g3h 12.60v...

fully discharged i've 000.3 ohms on L7220 any idea for PP5V_S3 pulses ? can come of many thing :/

find short to gnd P5VS3_VSW remove L7220 and inject voltage ?