Search results

Try Q7130, fake charger is not good idea

Solved Q5501 broken, i will replaced also battery indicator, SMC replaced from identical board ;) thanks

History board begin by no green/orange light, find short on ppbus replace u7000 burned and Q7035, and replace smc because battery not charging, so now board green light/orange light and only error in picture. noticed if i unplug battery indicator orange light present, if i plug battery...

reistance to gnd of PPBUS_G3H ?

No Title when a customer try hdmi replacement on PS4 :

get the cable on the faulty screen, and thermal cleaner for removal glass, good luck for had no trace on seal

lcd working with 2009, but not lvds cable

turns on with display without flat cable connected, J4700 and dc-in board looks very clean noticed : if i unplug and replug flat cable board will start correctly and if i shutdown and restart, board black screen no shime However dc-in board et cable work very good another laptop...

If flat cable connected i’ve only black screen no boot no display

board no liquid damage if i unplug flat cable board startup correctly chime and display just slow and fan full speed (good dc board et flat cable know, real charger), how to proceded ?

find 2 bad capacitor around smc, C4903 and C4916 (corroded) thanks for your help solved

removed smc, injected 3.42V into PP3V42_G3H and i get 0.05 amps

sorry for your eyes ;) so pin 2 of L6995 i've 124 Kohms sorry removed L6995 inject 3.4V on pin 2 i've got 0.47 amps and smc heat (already replace same problèm) noticed with magsafe plugged same problem smc heat

Voltage pin 1 of R6920 20,5V pin 2 15,20V pin 8 of U6990 14,78V pin 2 of L6995 124,7 ohms pin 6 of U6990 10mohms and decrease

SMC_RESET_L 0V diode mode on pin2 of R5280 0,480V R5281 0,483V smc seem clean no corroded

Board was little liquid damage U7100 area cleaning and replace corroded components, Good charger know, PP3v42_G3H 2.9V and PPBUS_G3H 12.22V already check U7000 area Noticed voltage on F6905 20V is not too high ? red area in picture heat

exactly pin 2 16.5 and pin 1 0.6V replace D7005 works solved thanks, with multimeter in diode mode, old D7005 seem work yet.

pin 2 of U7000 no short on dcin pin to gnd 40mohms and more, D7005 fine

DCIN pin of U7000 0.8V, acok 0V

Board looks very clean no green light and orange light PP3V42_G3H present PPBUS_G3H 0V resistance to gnd 0,5 mohms check U7000 area 17/18 27/28 fine real charger 85w good know, tried magsafe board good know