Search results

Yes of course: https://www.dropbox.com/s/r2p9b5kbq3mlqc9/Bilde%2022.09.2016%2C%2019.39.04.jpg?dl=0

Does anyone have any experience repairing these? The screen will not turn on. No light in front led. I do not have schematics for this one, but I have tried to google if this is a common issue. It seems like there is a lot of these displays with similar symptoms which leaves me thinking there...

Check the CPU side if any of the outer pins along the RAM slot are loose. Tilt it under the microscope and gently try to wiggle each pin to see if it is loose, most often they start loosening on one of the sides.

Yes probably bad RAM or slot, I just had one with the same problem. Two of pins on the RAM slot was loose so I re soldered them and everything was fine.

This thread can be marked as solved as I have replaced the BIOS and everything is ok with this one now :)

I actually don't now if it froze or not to be honest, but the screen went black.

Thank you Duke, i Will do that just in case :)

Yeah, that was my thought as well, but it was not that easy this time.

Just an update for those interested. So I have been troubleshooting a bit more on this one. First of all, there was more than one thing wrong with this computer. The BIOS was most definitely dead, i tried switching back and the beeping started again, nine in total, three short, followed by three...

Short luck, it has started freezing again, seems like it's worse when it gets a bit warm.

I think it was four or five beeps and the silent. I have replaced the BIOS now and it booted up fine. My problem now is that my only 820-2879 donor board was missing the BIOS chip and i pulled one of a 2010 White logic board instead. Is there a way to re-flash this BIOS inside the computer? I...

Got this MacBook Pro Mid 2010. No sign of water damage. Was working somewhat when I got it but it would suddenly stop responding with black screen until i turned it off and on again. After reinstalling the OS and using it for a bit it hang again and now it beeps and the led blinks when i turn it...

Can't go to Apple with a computer with repaired backlight :P

Yes I do :), but there were more things wrong with it when it arrived into my hands :)

I have this 17" MacBook Pro that have been sitting here for a while now. It shows clear signs of GPU issues. Starts booting but the screen goes black for half a second and then goes white. Anything to to with this board or should I just put it in the parts bin? I have replaced the tantulum...

Probably just luck that I haven't seen this before then :)

Once again Duke you're the man. Strange how I have never experienced this before. I have refurbished over a 100 MacBooks and I have never seen this behavior.

No sensor issues (according to the ASD), I'll try different RAM

Got this board today. Had no green light, some corrosion around 6990. Repaired the Onewire circuit and got green light. When I now try to boot, the MBP reboots halfway through the loading process. It acts the same with both SATA and USB. ASD EFI shows no errors. When I try to install from USB...

I have replaced in many 15" MacBook Pros as well, so they do break.