Search results

Hello, We have a Apple Macbook pro that had a damaged U3100, we replaced it, the board is now using 5.09v and 0,41a. checking under our thermal camera we see the T2 chip warming up along with a few other elemnets. What else could be causing the problem and what should we start by looking at...

Hello, We have a MacBook Pro A1989 with a 820-00850 board, it does not power on, fans do not spin, no chime while the board is in the MacBook it starts at using .04 amps and goes up to .70-.80 then drops to .10 and loops at 20v, the board taken out it starts at .06 and reaches .24 as it reaches...

Hello, We have an Apple MacBook Pro model A2141 and Board number 820-01700-A that does not boot up, does not chime, fans do not spin. It Uses 20v and starts at .08a and goes up to .60a~.80a and drops to .0a before going back up. What should we take a look at first? Regards, Zeydulla.

Hello, We have a Apple MacBook Pro with a 820-01700-05 board with water damage around and under U9580, the chips seem to have some damage on them as well. I have attached some photos to this ticket, what are the chances of the chips being dead. Regards, Zeydulla.

Hello, We have an Apple Mac Book Pro with an 820-01700-A board that had water damage on U9580 and C9580, we replaced U9580 and removed C9580 and the board now uses 20v and 1.4a and then loops back down to 0a 20v. Checking under our Thermal Camera the SSD Chips heat up to around 70c~80c in...

Hello, We have an Apple MacBook with a 820-01041-A board, it uses 5v and .03a. the board has water damage on C9081 and the testing pads between C9081 and J4801. What should we start with looking at first?

Hello, We have a MacBook Air Model A2941 that uses 5.16V but no Amps at all, there is no damage or water damage, the customer states that it just stopped booting up. What should we begin having a look at and where we could get the schematics for this MacBook? Regards, Zeydulla.

Hello, We have a Apple MacBook Pro with a damaged 820-01700-A board, the board uses 5.17v and 0 amps. There is damage on U6300, CA780, R1806, and U9580, I have attached a few photos for you to take a look at. Please advise on what our first step should be. Regards, Zeydulla.

Hello, We have an Apple MacBook Pro Model A1990 with a 820-01041-A Board that has received water damage to the Battery connector of the corpus, the Board its self is clean. The Board uses 5.13v .03a before dropping to zero amps and continuing to loop in that way. We checked under a thermal...

Hello, We have an element that has glue around it, how do we remove the glue and lift up the element with out damaging it? Regards, Zeydulla.

Hello, We have a Apple MacBook Pro model A2141 that does not boot and has no display, the fans spin for a few seconds before stopping. We connected an external display and it lit up for a second before turning off, this loop continues indefinitely. There is no water damage and the boards...

Hello, we have an A2442 Apple MacBook pro with water damage. The MacBook uses 5v/0a on magsafe and 5v/.17a on usb c, we want to know how we can fix damage to UF800 chip and how serious the damage is. I have attached some photos of the damage for you to take a look at. .

Hello, We have Apple MacBook Pro that had corrosion on certain part of it. We washed it and clean using DI water and it is clean now. The laptop uses 20v, charges well 3amps usage. Caps Lock has activity, USB flash drive conenctivity is there. We dont have a graphic output. Even used external...

Hello, We have an Apple MacBook A2141 that Flashes a file with a question mark symbol on the screen when powered on, it has no chime and uses 20.3v and 2.35a. Could a a problem on the logic board be causing this or could have the SSD chips failed? I have attached a couple Photos for you to...

Hello guys, We have a A2485 MacBook Pro that is using only 5v and .11a, when connected nothing happens at all. The customer said it is not water damage and some type of other failure. Here are some voltage readings of the main power lines. PPBUS_AON -> 12.3v PVBAT_AON_CHGR_R -> 12.30...

Hello, We have a A2991 MacBook Pro with a Board 820-02935-A that has some water damage around PPBUS_AON_LUXE and around PPVIN_P3V3SD, when connected to charge it uses 20V and .20A but after some time the USB Tester restarts and continues to restart. What should we be checking first? I...

Hello, We have a A2485 MacBook that has logic board failure. Customer says there was not water damage. He said screen went black while he worked. We removed the board. There are 3 USB C ports. When connected it shows 5.26v and 0.22a and restarts. Looks like it detects something and restarts. I...

Hi guys, We have a MacBook Pro A2141 model laptop with stuck on loading bar. Customer do not say it is water damaged. The laptop turns on without chime. Fans spins fine, uses 20v and over 1amps. It holds battery and charges. We see apple logo and stays on loading bar then. When you turn off...

Hey guys, We have guys we have a A2141 MacBook pro that has been damage by water, it uses 20v and 3.23a but has no chime, the screen shows no activity, but, the fans spin up and spin down and the cap lock lights up when pressing it. Would you guys have an idea regarding the issue that is...

Hello, We have a A2251 MacBook Pro that has water damage across the board, when connected to a port the board uses 5.09v and .28a and after a few seconds switches to 20.6v and 0.05a. We have a measured some voltages on the board: C6581/PPBUS_G3H -> 12.63v C3504_VWR:1/PPBUS_G3H -> 12.32v...