Search results

Pin 17-18 resistance 4.4 200 ohm setting Pin 27-28 resistance .909 on 2k setting Pin: 2 16.6v 3 3.9v 19 5.5v 20 5.51v 1 0v 26 0v 9 4.33v 15 0.5v All voltages little bit up and down apart from pin 19 and 15

Will get resistances and voltages. Am I to assume I am correct from the picture about where pin 23 is?

Damn, just realised the psu U was using was 65W, Using 85W: Light on connector goes green then red. Voltage at the green component on each side goes between 16.1v and 16.85v. On the assumption have got the correct pin 23 on the isl 6259 as high lighted in the attached picture the voltage goes...

Checking isl soon then I will get back. I need to work out which pins are which from another schematic

When connecting power, you get green light that goes red, 16.75v on each side of the green component

No Title OK I will look for it. I have found the components on the board, the black beeps the green does not. Are they types of fuse?

How do I find the components on the board with no board view. There isn't a board view in the schematic either.

[SOLVED] 820-00138 A1398 not switch on after short from charger, what charger does it need? Not switching on, owner says it was on until battery went flat, but now does not switch on or charge. I have a schematic for it, but no board view. Is there a board view anywhere for it? The schematic...

Thanks, any updates I will post up

Cool thanks, where about is the chip on the board?

OK what do I read the chip with?

Picture attached

She is from 2011, I have been told when switching it on it gives a padlock symbol on screen, but I haven't managed to see that yet. All I have seen from it is when switching on you get the apple symbol, then a loading bar, then a progress wheel. The loading bar goes about half way then it goes...

Bitch, should have though of that already. Will do

Not switching on, when connecting power, no green/red light on charge connector. Charge voltage is getting into the board Found short at C6994 and C6999, removed and shirt still there. Removed U6990, short still there. From what I can see on a schematic it should be pp3v42_g3h_reg coming out of...

I have the 861 da in the UK. F@cking amazing thing. I used to use a Hakko FR810, but due to wanting bent hot air tips that Hakko don't do I had to look elsewhere then found the Quick. It is up to temperature in seconds where as the Hakko takes minutes. It hurts not using the Hakko as much as it...

Data recovery is a weird thing when it comes to value. You can possibly give the customer everything they want, but if it is expensive then forget it, but as Duke says, getting about the ability for you to be able to do it is probably not a cheap thing. I would say keep prices higher, also if...

About 5 hours sleep a day Monday - Saturday. 4 hour lay in on a Sunday. I get tired if I sit there doing nothing and just waste time.

No problem thanks for the tip. I am always aware that someone will blame me for everything in the world at the drop of a hat.

Mouse pad connected again, everything else as well apart from keyboard and switches on ok. Are keyboards built into the housing on this model?