Search results

No changes with fake charger

Should i post u7100 voltages without F7140

After removing F7140 pin1 is =0.435 pin 2 is 0.175 0V at c7140

Ppbus_g3h is 1v Pp3v42 is 2.6v All_sys_pwrgd=0v I have removed u8150 no changes... No corrosion on the motherboard R7012 is fine and f7000 is okay... What to do?

Thanks 🙏🏽 The customer run out of patience he has picked it up

Can u help us with SoC ROM file?

No the board is very cleen and sharp.

SSD Voltages not present Diode mode to ground on coils around u8100: L82B0/B1=0.123 L8270=0.245 L8120=0.038 L8230=0.340 L84E0=0.302 L8290=0.285 L8281/80=0.198.. Around u7700 L77A0=0.180 L7760=0.361 L77D0=0.278.. L5800=0.185 L5820=0.185 L5840=0.185

The Board draws 20v 0A with charger and battery connected ppbus_g3h=10.76... With only battery connected ppbus_g3h =10.77 With only charger connected is draws 5v 0.02A and Ppbus_g3h is 12.04V.. All other power rails are present and stable. Have tried DFU restore and gives this error GAVE UP...

This board chimes continuously with no display.. Did smc reset and pram and displays but still chimes continuously.. I have tested only with power button and screen connected no change and no corrosion on the board.. Should i try DFU?

It gets very hot and fan speeds very fast

Board still working when charger is connected on the port where Q3200 is located

I want to post a picture of how i placed the board but it says file too large

QB300 UPC_TA_GATE1=0.655 UPC_TA_GATE2=0.647 PP20V_USBC_TA_VBUS_F=0.0.182 PPDCIN_G3H=0.548 QB400 UPC_TB_GATE1=0.653 UPC_TB_GATE2=0.646 PP20V_USBC_TB_VBUS_F=0.183 PPDCIN_G3H=0.549

Q3200 TP_Q3200_DRAIN=0.547 UPC_XB_GATE1=0.641 UPC_XB_GATE2=0.640 PP20V_USBC_XB_VBUS_F=0.178 PPDCIN_G3H=0.545 Q3100 TP_Q3100_DRAIN=0.637 UPC_XA_GATE1=0.648 UPC_XA_GATE2=0.640 PP20V_USBC_XA_VBUS_F=0.178 PPDCIN_G3H=0.545

no just tested it now...only gets very hot when connected to the first port on the left

U5850 not getting hot works fine.. Q3200 now gets very hot have changed it no changed and replaced U3200 no changes

Pp1v8_s3 not present Diode mode 0.436

good board Bad board L7702=0.063 0.039 L7420=0.07 0.06 L7410=0.07 0.06 L7220=0.07 0.06 L7210=0.07 0.06 L7270=0.031 0.024 L8102=0.135 0.130

Ppbus_g3h=13.3v Pp3v3_g3h=3.3v Pp3v0_g3h=3.0v Pp5v_s5=5.1v Pp3v3_s5=3.3v Pp3v3_sus3.3v... S4 rails are not present...diode mode to ground is 0.513 PM_SLP_S5_L is 0V