Search results

I have removed f7000 C7050 voltage is 0.5v L6900 is 0V SMC_4FINGERS_RST? = 0V

Draws 5volts 0A Ppbus_g3h=0v diode mode to ground is 0.436. Pp3v3_g3h=0v diode mode to ground is 0.367. All CD3215 has the same reactions.. u7000 voltages: PPDCIN_G3H_CHGR=5v TBA_VDDA=5v TBA_BOOT=4.7v AUX_DET=1.2v PM_EN_P3V3_G3H1.889v SMC_RST_L=0V CHGR_A/BMON=0V

"12c1: :_checkBusStatus SCL is stuck low;

No issues found in diagnostic mode.. I tried DFU revive system now boots to finder with panic report

The system restarts after password is entered.. No corrosion or corroded components. I have inspected the board via thermal camera nothing gets hot..HELP

I have replaced R5002 is a 100k resistor...no changes

What do you mean by force with 100k

SMC_RESET_L=3.3v PP3V3_S5_SMC_VDDA=3.4v PP1V2_S5_SMC_VDDC=1.2v PP3V3_S5_AVREF_SMC=3.3v SMC_EXTAL=0v SMC_XTAL=0v SMC_CLK32K=0v SMC_WAKE_L=0V SMC_TDO=3.412V SMC_TDI=3.413V SMC_TMS=3.412V SMC_TCK=3.412V

I have try another LIO board SMC_RESET_L=3.383

Board is very neat ppbus_g3h=8.18v pp5v_s5=5.1v Pp3v3_s5= pulsing PP5v_s4rs3=0v All_sys_pwrgd=0v PCH SIGNALS PPVRTC_G3H=3.3v PCH_INTVRMEN=3.3V PM_BATLOW_L=0v PM_DSW_PWRGD=0v SMC_ADAPTER_EN=0v PCH_DSWVRMEN=3.2v

😢 the board stopped working now ppbus_g3h is now 5V after coupling

Bad u7100...it was from a donor board now replaced with new one thanks 😊

Pin 1=0v 2=16v 3=4.3v 9=0v 12=3.42v 13=3.39v 14=3.394v 15=0v 17=0.6v 19=5v 20=5v 27=16v

I have replaced R7095 Ppbus_g3h still 3v Pp3v42_g3h=3.42

R7095 is broken can i replace with a 200kohm resistor? have replaced u7000 short gone

The board i removed the SMC board was working

Pin3=0.277 Pin1=0.003 from the processor i think 🤔

C7111=0.003 R7110=0.003 diode mode to ground at L7095=2.005 U7090 voltages Pin1=1.3v Pin2=1.942v Pin3=4.3v Pin4=1.9v Pin5=gnd Pin6=16v Pin7=unconnected Pin8=16v Pin9=gnd

Pin 1=0v 2=16.28v 3=0v 9=0v 12=1.9v 13=0v 14=0v 15=0.340 17=0v 19=5v 20=5v 27=0v

The board draws 20V CPU gets warm too liquid spill on the motherboard the affected area was U8510 and c7434,c7436,c7437 are corroded... I replaced all components and no changes.. I took some readings around u8510 compared diode mode readings to good board found r8592 pin 2=BUF_SMC_RESET_L is...