Search results

this is the voltage PP3V3_S5_REG_R if i put probes right before connecting power supply https://www.dropbox.com/scl/fi/yi41k...pcctutaa4&dl=0 That it stuck to 2,8v..and i think it should he 3,3

i don0t know what to do

S5_PWRGD is 0,3v.... i cant find where to cut trace...i could put some uv on pin 20 and resolder u7501

However i can't see trace from pin 20 or from r8141...even scraping...

why? i have changed u7501...

r8141 (same value) and u7501 changed ,,,,still 0v STILL 0V EVEN WITH 10K RESISTOR

3,3v

0v no shorts on the other side of the resistence i have 3,3v

PPBUS at 8.6V No Fan Spin I get Magsafe light (green than orange with or without battery) motherboard water spill (cleaned from another techician) 3V3_S5 present 3V3_Sus not present P3V3SUS_EN 0v PM_SLP_SUS_L 0v (no short) PM_PWRBTN_L 0,3v SPIROM_USE_MLB 0v S5_PWRGD 0v PCH_DSWVRMEN - 3,1...

Yes and short persists also removing u1900

i'm too scared that pch is dead

https://www.dropbox.com/scl/fi/fwulruf9r4yhnn4xn2e8h/Video-27-02-24-09-05-29.mov?rlkey=m9iuirnpekkht8mcco4lr9nwf&dl=0 Ppvrtc_g3h: game over?

I can’t see anything hot under thermal camera….i will try to remove u1900 How can I program smc?

is it normal that ppvrtc_g3h is shorted?

i mean bought new, not from donor board SMC_ADAPTER_EN, 0v PM_BATLOW_L, 3,3 PCH_DSWVRMEN, 0v PM_DSW_PWRGD 0,9v

ppvrtc_g3h shorted! smc brand new...

ok now i have PPBUS_G3H=8.18 3V42_G3H=3.42 3V3_S5 3,3 no voltage for PP3V3_SUS (no shorts on u8020 i have 0v on P3V3SUS_EN no shorts 0v on R1464 no shorts

even changing u8100 no luck... :(

i don't know the history of this motherboard...i've found in diode mode a super low value on pp3v42_g3h...removing l7095 and l7090, i've injected voltage on the line and found that u5000 become hot (3v 0,0100 amp) should i reball it? should i change it?

so it was unusefull to buy another u8100? (50 Euro🥲)